Gilby

Previous usernames

Loading…

Yes, that is what I am talking about. I knew it was 3/4'' just wasn't sure on thread pitch. Thank you!!

If you are talking about the tube that is supposed to go thru the transom and have a nut on the outside those are usually 3/4"x14 thread.

Another update on progress. Had a pretty nice day yesterday so I decided to finish the paint. Just needed to do the bow and top rail...

I have to run up to town tomorrow anyways so I will take it with me to see what I can find

Take your pump to a quality plumbing supply house ( not a big box store) and see if they can set you up with something that will work.

Hey guys, I have a question on thread type. During my restoration project I put a new transom in. It must be about 1/2" taller than...

I ended up getting some 2" round vents with louvers and screens on them. I will put one one each upper corner. Should allow enough...

A River Runs Through It. :)

New seats showed up today and carpet was shipped today. Ordered both through bassboatseats and seemed to be a decent price. Not really...

Many home stores carry metal perforated with designs. Cut a good sized oval or other shape into one side and put the metal grill behind...

Ok. So basically as long as there is any type of vent? Because it will also be used as a step, it will be lower than the deck so would...

Yesterday I went and bought two new group 27 batteries. (lead acid) I plan on putting them basically midships on my boat to help with...

Welcome and thanks for the pics -- nice rig. Likely more folks will see and enjoy your pic's and work if you put it over in the...

I like it! Yes, I think you should start a build thread. You can start one and add to it as you get work done. That will keep your...

Thanks. I have done a few smaller things. This was the first time painting something of this magnitude. It turned out pretty good...