uncndl1

I found some pictures of my boat (it's currently in the water) and it has small washers on the motor/bracket side and I know it has big...

I read somewhere years ago..... the bottom mounting bolts go from outside in, as they are underwater and threadless shaft of bolt is...

My thought would be large washer on the inside to distribute force as the inside is likely a wood filled space or something. If it was...

Found this neat little boat up near Boise. Picked it up for the motor to re-power another project. Got it registered so that we can get...

Ran into a individual in town towing the same boat I have. He came by the house this afternoon and we had a great conversation about our...

So was I, when I had mine, nice boat and served me well for the three yeas I owned it !! I try to boat cheap...retired so not a big...

I’m getting ready to install the safety switch that shuts the motor off. The one picture is at the outboard. When you touch those two...

Not long after getting my Mirro, like you, I started thinking how nice it would be to have remote controls. Lots of advantages. I soon...

No reason you can't...not required to be straight verticle, many are mounted on the angle of the side of the boat. If you have enough...

To be fair, the bracket only has to be as wide as the mounting holes of the controls. If the aesthetics is a problem, a control...

I'm wondering if it would make a difference if the control box was bigger than the bracket. If yes, and that bracket is what you want...

I just was updating what I’ve done so far and saw your post. Unfortunately she is not an electric start nor a power trim model. I took...

Thanks for all the above comments and thoughts…I went ahead and used the motor control bracket that I had purchased off eBay, even...

I think the side bracket mentioned above won’t work because my control box is longer than 11”. I might need to fashion something to...

If by newbie you mean this is your first boat, then maybe use it as is for awhile before making modifications. Doing that will give...