Search results

Answered my own question but posting in case this helps someone else in the future. My trailer uses reverse slipper, c hook style springs. There's a nylon bushing in the center that the spring glides on. None of the local trailer shops knew what I was talking about and only one old school...

Looking to add some interior lights for night fishing. Any preference on colors? Red or white? I'd be alright with old school non led lights because they aren't as bright. Any suggestions?

TH Marine mini jacker fixed worked for me.

Have an old sea nymph that I need a good front mount trolling motor solution for. Had a power drive v2 mounted on an aluminum plate attached to the front gusset plate, ran aground and broke the gusset plate (connects the v, has handles casted into it). Motor was too deep, shaft on the motor is...

Need more vertical? https://www.cabelas.com/product/T-H-MARINE-SUPPLIES-MINI-JACKER-JACK-PLT/3017887.uts

Get the engine at the right height, I have a 20 hp four stroke running a 9.25x10 and it will run 24 mph at about 750 lbs and fully loaded at 950 lbs 20 mph @5,800 RPM. The 20 hp is a dog, the 25 should be kiillng it. I know my redline is 6,100 and the power band hits about 5,500. This is on...

I run mine at 70 psi, I think they max out at 80 psi. You will need metal valve stems rated for the pressure. Not all metal stems are rated the same. I've bought them on the rim mounted from Recstuff for around $60 shipped.

I've had a couple sets of the 12" load range C. Good tires. Recstuff.com will be the cheapest. Ordered from them a bunch and had them in two days

:shock: My trailer safety chains are just through bolted with a grade 8 of decent size. You can hook to the rear carry handles, the straps just need to be snug. I put two eyelets in the rear of my trailer and strap them with to the handles with these. You also need to add a safety chain up...

I have a 20 HP version of that engine that I just mounted on a utility hull 1460 - I mounted mine on a fixed jack plate the the cavitation plate is near level to an inch above. I was experiencing a ton of splash as well, a lot of the research I've done mentions that the design of this...

You'll get varying responses on adhesives, more so if you search. If you use a spray, I'd stick to 3M. https://tinboats.net/forum/viewtopic.php?f=3&t=22430&start=15 I originally used Roberts 6700 outdoor glue from Home Depot - it worked but was a pain in the *** and took a long time to...

Update, here is my splash guard setup. Better than nothing.

Wood Weld contact cement, follow the directions, too heavy will bleed through. Pictures of what you're working on would help dramatically.

Wanting to steel flex my 14' deep v, boat is roughly 175 lbs. I know I can hook it to a tree and drag it off and retrailer it. What's the easiest way to flip it without causing damage? I'm assuming I can't apply steel flex with it on the trailer? Is there something similar to steel flex that...

They reap what they sow. Closing all of the states lakes and hunting sites due to Covid is going to hurt the DNR badly. They're already underfunded and they'll likely cut staff as a result. The trailer plate increase is asinine, especially for something I only use three to four months out of...

Yes, I use the Minnkota bow support. Powerdrive V2 - 70 lbs https://www.cabelas.com/product/boating/electric-trolling-motors/electric-trolling-motor-accessories/pc/104794380/c/104716980/sc/104312880/minn-kota-stabilizer-kit-elect-steer-tm/3273347.uts?slotId=1

Sea Nymph 14R - Mini Jacker - Mercury 20HP 4 Stroke long shaft. Runs 25-26 mph on smooth water with just me. Added some plate bracing for my own sanity but I'm not sure it needed it. I have wave wackers to go across the back that I haven't installed yet - you might want a splash shield or...

Ended up running two group 31's up front and a U1 sized 35 amp hour deep cycle battery towards the back for the depth finders.

Depends on the time of the year, however, I've fished at the Cherry Grove Boat Landing, northwest of the pier. I've had a lot of bite offs, used live bait and rigs from Fish-On Outfitters.

Do they make battery boxes for the smaller 35 amp hour batteries?