MarshGrass
Well-known member
- Joined
- Jun 23, 2010
- Messages
- 45
- Reaction score
- 0
Just picked up a used Johnson 25 HP Motor ...2 cycle.......(my first motor) and wanted to know if it was nomal for the motor to sway back and forth. Heres what i mean: if the boat is in the water and i turn the hand controlls to the right, the boat will turn.....but if i let go of the hand control the motor swings back to the straight position. My dad has the same motor but in a 15hp and i can move the control stick to the left and turn the boat, take my hand OFF the controlls all together, and the boat stays on a turning coarse because the motors stays in the position i left it. Hope this makes sense....is there some sort of bolt i can tighten to keep the motor from wondering so much?