2075 commercial grade jon boat,

[czuniga]

 

[czuniga]

1/8 inch aluminum floor

 

[screamensemen]

Looking good!! Have you come up with a layout plan for the boat?

 

[riverrat717]

Did you ever get prop tunnel measurements? I'd say call Seaark and ask them.

 

[czuniga08]

decided to get her on the water as soon as possible. I will get her running and determine how shallow will I be able to go. She drafts about 6 inches still need to add the floor, console and motor, i'm fixing to install a 98 Yamaha 115. I might give her a try with a cmc lift to see how shallow she handles ,, will be posting pics of floor soon.

 

[czuniga08]

Hello,

Did have her on the water to check for any possible leaks before setting floor. Primed only bottom of boat,will not paint under floor. I was just trying to lay some kind of protective barrier. Floor will be primed and painted white also,, console if next,,,

 

[Big_ug_chevy]

Hello,

Did have her on the water to check for any possible leaks before setting floor. Primed only bottom of boat,will not paint under floor. I was just trying to lay some kind of protective barrier. Floor will be primed and painted white also,, console if next,,,

Beast of a boat bro. Nice find, all that hard work will be worth it once you're yanking lips on the water! Keep the pics coming! I built a center console also, take a look it might give you some ideas.

 

[czuniga08]

couple more pics, console was not bolted it was fastened with 1 1/2 self tapping screws. Do you guys think it will hold up. Aluminum is like 1/8 inch thick. What do you guys think about location of console. should I had placed it a little more forward?

 

[czuniga08]

Fixing to drop this motor,,
115 Yamaha V4 1998 I believe,
what is your opinion. Does anyone have a similar motor. It is premix, not the precision blend.

 

[czuniga08]

More pics

 

[Ebug]

The rails on the front of that hull sure add some nice lines.

How long before you take here for a spin?

Rob

 

[czuniga08]

Maybe couple more weeks. Im waiting for my hydraulic steering to come in. Depending on how shallow she handles i will probably
End un getting her a jackplate.

 

[czuniga08]

Hello,

Finally got her in the water.. Boat handled really well ,water was a little rough but still managed to test the outboard. Over all it handled very well. 115 Seems to be more that enough power . Alarm did go off while on plane . might be water pick up. Also I noticed that when trying to move in reverse boat had very little bite and tended to splash lots of water over the transom. I believe a anti ventilation plate or cavitation plate might solve the problem. Did run boat longer but at less throttle and alarm didn't go off again,,,

will keep you all posted

 

[Wyatt]

That's good news! Boat looks awesome. I can't help but think about all that room on that bow for a spider rig!

 

[czuniga08]

hello

down here in the lower laguna madre we do a lot of drift fishing. will keep posting pics, still to come is the cavitation plate, and some storage for the inside of boat.

 

[czuniga08]

Update

 

[flex]

Dude that's a sick build. I've always loved those big aluminum rigs! Can't wait to get mine down to the madre!

Sent from my HTC One M9 using Tapatalk

 

[fool4fish1226]

Awesome boat =D>

 

[DPI]

Beautiful boat!

 

[czuniga08]

Boats in the shop getting a tunnel and raising transom and a rear deck. Front tower and leaning post are in the works. Axious to see how shallow she will handle..