judsondeancole
Member
I synchronized my linkage and cleaned the carb. I tore apart the fuel pump and rebuilt it. I bought a new gas tank and supply line and put on new plugs.....what else. I got it started after it sat for about 3 years. It ran rough, but it ran. It quickly died on me and I diagnosed some easy fix problems. I finally got it running pretty smooth and have taken it out about a dozen times. The only problem I had was a hard start on a cold morning. I took it out last Sunday to do some fishing and it wouldn't start. After 2 hours it finally cranked and ran well.......then it died #-o . I tried to start it and it acted like it was not getting enough fuel, it would die out after I let off the throttle. I cranked, and I cranked, and I cranked to no avail [-o< . I finally broke the starter pawl. I just don't know what the problem is. Also, I bought another starter pawl but I'm unsure of the exact replacement procedure. I think it is on right, but I took the return coil assembly off and have not put t back on the boat to see if it is operational. Any advice would help with getting my motor runnin and any advice, diagrams, or schematic of how the starter pawl and spring need to be orientated woul also greatly help.
Thanks..........
Thanks..........