gabeskillzz05
Active member
- Joined
- Aug 20, 2014
- Messages
- 42
- Reaction score
- 0
Cleaned up the impeller today and finished cutting the hatch in the rear bench. One note is that the custom hatch from cabelas only has a pull latch, it does not securely lock. I will be adding a better latch that locks.
Need to stop and pickup a set of feeler gauges after work and then put the pump back together. Should be able to hit the lake this weekend and test it out. I hope everything works out well, I can hardly wait to run this thing [-o<
Anyone have a comment on the water coming out of the slot between the adapter plate and midsection? It seems to me water is supposed to come out but not completely sure.
And also does anyone have a link for where to buy the grease gun and grease for the jet unit???
Pics make the thread so here's a couple more.
Need to stop and pickup a set of feeler gauges after work and then put the pump back together. Should be able to hit the lake this weekend and test it out. I hope everything works out well, I can hardly wait to run this thing [-o<
Anyone have a comment on the water coming out of the slot between the adapter plate and midsection? It seems to me water is supposed to come out but not completely sure.
And also does anyone have a link for where to buy the grease gun and grease for the jet unit???
Pics make the thread so here's a couple more.