RCP
Active member
- Joined
- Jul 31, 2008
- Messages
- 31
- Reaction score
- 0
I got extremely lucky and found an estate sale off the side of the Hwy last year. Some guy bought a row of 3 farm houses and was clearing out the barns of all the stuff inside them. He had this 14' Lonestar Semi-V hull on trailer with a motor on the back with a for sale sign on it. I stopped and asked what he wanted for it and he sold it to me for $50!! The trailer was banged up, and the old 50's outboard is seized up but who could pass it up for that much. So I bought it and brought it home where it's sat for the last year. Left him my address and he actually tracked down a title and mailed it to me! I have finally started putting it all together to make it useful again and here is my progress so far.
-Took the old outboard off and put it in the shop. I might work on it later and see if I can make it work. I had a similar vintage Evinrude 15hp that ran ok but I bought a late model 20hp Merc to replace it with.
- Took the trailer out and set the boat on an old Dilly trailer I had laying around from an old tri-hull that I used to have. It fits perfectly!
- Tested the boat for leaks and found only a couple, patched them up good as new!
- Here is where I'm at below. I have started decking and flooring it. I don't have the latest pictures yet but I have now just recently removed the console and controls. The new modern motor couldn't use them anyway and it opened up a ton of floor room. Anyways here are the pictures I will add more as I progress and make this into a fishing machine once again!
-Took the old outboard off and put it in the shop. I might work on it later and see if I can make it work. I had a similar vintage Evinrude 15hp that ran ok but I bought a late model 20hp Merc to replace it with.
- Took the trailer out and set the boat on an old Dilly trailer I had laying around from an old tri-hull that I used to have. It fits perfectly!
- Tested the boat for leaks and found only a couple, patched them up good as new!
- Here is where I'm at below. I have started decking and flooring it. I don't have the latest pictures yet but I have now just recently removed the console and controls. The new modern motor couldn't use them anyway and it opened up a ton of floor room. Anyways here are the pictures I will add more as I progress and make this into a fishing machine once again!
![oregon051.jpg](https://proxy.imagearchive.com/d2a/d2ad5f5647352be0320d84683ecada37.jpg)
![oregon052.jpg](https://proxy.imagearchive.com/bda/bda0c3f725b185459598d2bdfcbbdd6e.jpg)
![oregon053.jpg](https://proxy.imagearchive.com/27c/27ce3584c94d2765fbf20e7bf928dc02.jpg)
![oregon059.jpg](https://proxy.imagearchive.com/061/061f6d926ab38c0953305f88355e1e5e.jpg)
![oregon058.jpg](https://proxy.imagearchive.com/ac8/ac8fad3d920d96f87d1ace946b2d86f1.jpg)
![oregon055.jpg](https://proxy.imagearchive.com/6ff/6ff4fd74189a7bc093e95cd5124637d3.jpg)
![oregon056.jpg](https://proxy.imagearchive.com/b6c/b6c636622973ff9eb36b112505da0c4a.jpg)