Seat help

[Clam]

I need a little help. I've been trying to search for the seat mounts that mount to the edge of the deck and is like a rail system. The seat can be folded down and removed or slid over. Are there specific seats to go with that style mount? Any help is appreciated.

 

[strander100]

Search for the subject Grab Bar on this forum and you'll see mine. There are holes in the seat attachment piece that are supposed to fit many seats or you can make your own holes. Not sure about seat posts, because mine sit flat on the casting decks, while I stand to fly fish. Easy to remove and store in the rear compartment. Works for me, good luck with your plan.

 

[stomper]

I just did a google image search for sliding boat seat. You might find something out here.
https://www.google.ca/search?q=sliding+boat+seat&tbm=isch&tbo=u&source=univ&sa=X&ei=w39BUqW9JeG62AXX44G4Bw&ved=0CFgQsAQ&biw=1024&bih=653&dpr=1

 

[stomper]

These are dune buggy seat sliders (bottom of page) that you may be able to use and fab up some sort of bracket to work.
https://www.dansperformanceparts.com/buggy/seats/buggyseat1.htm

 

[RiverBottomOutdoors]

https://www.sliderg5.com/

I have one in my boat and love it.

 

[stomper]

Thats a good one. would work awsome for balancing a small boat

 

[Clam]

Thanks for the replies. I have seen the sliderg5 but I am looking for something that the brackets will almost be flush with the deck when the seats aren't installed. I have seen them in person but can't think of the name for the life of me. The seat will have a lip on the front bottom and it will fit in the groove of the bracket.

 

[RiverBottomOutdoors]

Ah... I think this is what you're looking for?

https://www.iboats.com/Swivl-Eze-Bench-Style-Seat-Mount/dm/view_id.341745

 

[Clam]

Ah... I think this is what you're looking for?

https://www.iboats.com/Swivl-Eze-Bench-Style-Seat-Mount/dm/view_id.341745

Yes, that's it, the middle one. Thanks!