Jim, nothing physically besides the wood looks like it wasn't sealed. The Max hp I'll consider adding is 40 just depends on what I find on craigslist at the time. Honestly I'm planning on modding the boat. To seat three or four. I might remove the long cap on the bow.and shorten it or make it storage and or a short deck.
Well I've been searching and found one pic. Looks like the next size up had a windshield. Anyone know if I would be able to find a windshield to fit mine?
windshields can be found on the interweb.
you will also need the stainless clips and end brackets.
If you can find an old beat up one on C/L, you could cut it
to fit your boat and use that as a pattern to bend you a new one.
BUT- that process takes some skill and experience in working with
plastics.
in the long run, it may be cheaper to buy a custom made one for your boat.
Good Luck !! looking forward to seeing it when you get it all cleaned up.
Back then most boat manufacturers got windshields from a supplier. My StarCraft Falcon's windshield was made by Taylor. Take some measurement and watch Ebay and CL for one that look period correct.