Suzuki 25hp oil injection bypass

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Camper

New member
Joined
Oct 27, 2016
Messages
1
Reaction score
0
After some issues with motor I removed the oil injection and wen to mix. Removed tank and wiring as well as sensor with light. Motor runs great but I need to know the wire to disconnect to prevent
the motor from going from 3 to 2 cylinders. The motor is recognizing low oil but do to mix I need to disconnect that sensor. Having trouble on which wiring it is. I believe it is black with red or pink stripe that goes up to near carbs. Is there anyone that give me some help. Thanks in advance.
 
I would suggest you post this question on Iboats.com in the Suzuki forum.
 

Latest posts

Top