I wanted to make a dead simple boat for smaller lakes, and to have something to use smaller vintage motors on. I found this boat on Craigs. It had been sitting upside down under a deck in the dark since 1993. Every bit of wood was gone.... eaten by ants most likely.... Floatation rotten.... but otherwise a very sound hull. ( seats are aluminum shells with plastic woodgrain over them).
First step... strip the outside... baby blue is not my color...
Prep and paint the inside aluminum 2 part urethane paint: (first coat)
First step... strip the outside... baby blue is not my color...
Prep and paint the inside aluminum 2 part urethane paint: (first coat)