Carver Sunbrella Boat Cover

This forum is for the Sponsors to talk about their products and make announcements. If you have any questions for the sponsors, ask away here.
Post Reply
BoatCoversandBiminis
Site Sponsor
Posts: 67
Joined: 21 Jan 2014, 11:12
Contact:

Carver Sunbrella Boat Cover

Post by BoatCoversandBiminis » 20 Dec 2018, 14:19

Styled to Fit boat covers by Carver are designed to fit a variety of boats with a specific hull design and relatively close dimensions. Most of these covers are made with a shock cord encased in the hem and an attached motor pocket, to cover the boat and motor in one.

James has a Hog Island SW16 Skiff and, since we didn’t have his exact boat listed on our selector guide, he wasn’t sure which cover to order for his boat. After speaking with one of our knowledgeable representatives and providing an uncovered picture of his boat with a few basic measurements, he received this great fitting cover!

https://www.boatcoversdirect.com/boat-l ... ed-to-fit/

Image

He explained the boat is left at his dock so we suggested mooring bags in place of the tie down straps to keep the cover secure and in place. James also knows the damage a poorly supported cover can do to your boat, so he’s installed an adjustable support pole to keep the cover tented.

The moral to the story is, if there’s a will, there is a way. James found his way by choosing Boat Covers Direct and allowing us to help him receive a cover that would provide his unique boat a great fit! If you have questions about a cover for your boat, feel free to reach out at any time and we’ll be just as happy to help you too!

Happy Boating
Shannon with Boat Covers Direct
866-626-8377
shannon@coversdirect.com
Image

Post Reply