Favorite mod

Boating related questions,small projects, custom work and talk go here.
Post Reply
fishingmich
Posts: 156
Joined: 15 Mar 2011, 21:31
Location: SE Lower Mich

Favorite mod

Post by fishingmich » 23 Oct 2012, 16:45

I would like to know what everybodys favorite individual mod is. Not entire boat mod, but one particular mod in someones thread, that really stands out. There are so many on here, but one that stands out to me is from UtahBassKicker. Anyone that owns a tin knows that the biggest problem we all face is storage and Utah's little tip about using 24 series battery boxes to fit 4 3600 series plano boxes has stuck with me since I read it. I put one in my 14 ft Starcraft and it is awesome. I'm not overly computer savy so I can't put a link in for it. But if you can, please put one in so everyone can check it out. [-o<
I fish, therefore I am AWESOME!
16' Smokercraft V Hull
15 hp Merc

RazorBaits
fishingmich
Posts: 156
Joined: 15 Mar 2011, 21:31
Location: SE Lower Mich

Favorite mod

Post by fishingmich » 23 Oct 2012, 17:04

Also not looking to piss anybody off, this is just the one mod that sticks in my head. The people on this forum are some of the smartest people I've ever been associated with.
I fish, therefore I am AWESOME!
16' Smokercraft V Hull
15 hp Merc

nomowork
Posts: 1137
Joined: 20 May 2011, 00:42
Location: The wacky west coast

Favorite mod

Post by nomowork » 25 Oct 2012, 11:52

Not really a mod but my favorite is putting a brand new motor on both of my boats. It really helps with the peace of mind thing.
HAPPILY UNEMPLOYED

kfa4303
Posts: 244
Joined: 01 Dec 2011, 15:41

Favorite mod

Post by kfa4303 » 25 Oct 2012, 22:23

My favorite mod is kind of a two'fer. My PVC tiller extender has made the single biggest change in the way I'm able to handle the boat. To go with it I also built a PVC grab bar so I don't fall overboard while zooming around. Between the two of them, I can stand/sit/see/steer three times better than before. Best of all, it only took about 5 min and $5 to make. Of course, they make high dollar carbon fiber models as well. Overall, tillers are making a bit o f a comeback down here in FL where they are often preferred over console boats, especaially for small flats skiffs.

jigngrub
Posts: 756
Joined: 03 Aug 2011, 08:11
Location: Talladega, Alabanana

Favorite mod

Post by jigngrub » 27 Oct 2012, 14:35

My favorite mod was ripping out the nastyass carpeting in my boat and replacing it with marine vinyl:
Image
Image

Carpeting has no place in a fishing boat!

Red clay mud and dried fish blood doesn't even stain the marine vinyl, I was pretty surprised and happy when I discovered that.
Rum, wenches, and song... just another day on my boat.

fishingmich
Posts: 156
Joined: 15 Mar 2011, 21:31
Location: SE Lower Mich

Favorite mod

Post by fishingmich » 28 Oct 2012, 12:24

Hey jig! How was the vinyl to work with and where did you get it? My buddy put vinyl in his jon boat and he loves it. I don't have a lot of patience and was worried about using the vinyl in case it's tough to work with?
I fish, therefore I am AWESOME!
16' Smokercraft V Hull
15 hp Merc

jigngrub
Posts: 756
Joined: 03 Aug 2011, 08:11
Location: Talladega, Alabanana

Favorite mod

Post by jigngrub » 28 Oct 2012, 12:40

fishingmich wrote:Hey jig! How was the vinyl to work with and where did you get it? My buddy put vinyl in his jon boat and he loves it. I don't have a lot of patience and was worried about using the vinyl in case it's tough to work with?
... and you'll love it too if you put it in your boat.

It's not bad at all to work with, I think it's actually easier than carpet. It cuts easier and goes on easier.

I bought it online at Defender Marine Supplies, cheapest price I found on the "net" and great service too.

https://www.defender.com/category.jsp?pa ... &id=311410

It's the same stuff Cabelas sells for $5 more a linear yard.
Rum, wenches, and song... just another day on my boat.

lovedr79
Posts: 2565
Joined: 07 Mar 2011, 19:58
Location: Harrisonburg, Va.

Favorite mod

Post by lovedr79 » 28 Oct 2012, 15:41

My rear moving fuel tank forward and battery forward
Grizzly 1448SC
Lowe 10' jon

User avatar
bcbouy
Posts: 1369
Joined: 03 Jan 2011, 12:29
Location: british columbia canada

Favorite mod

Post by bcbouy » 30 Oct 2012, 19:43

my fav is most definately the switch plate and 12 volt power plug.no more clamping stuff to the batteries.i also ran lots of spare wires so i can add stuff without fishing more wires thru the conduit.now i just need to start the built in cooler. :lol:
if all else fails....stop using all else

CodyPomeroy
Posts: 200
Joined: 06 Nov 2011, 14:14

Favorite mod

Post by CodyPomeroy » 02 Nov 2012, 23:28

jigngrub wrote:Carpeting has no place in a fishing boat!
I couldn't agree more. My boat gets filthy and carpet would be a nightmare. I use outside door mats instead.

User avatar
BassAddict
Posts: 4419
Joined: 04 Aug 2007, 11:22
Location: Yet another move closer to Ahab!!!
Contact:

Re: Favorite mod

Post by BassAddict » 03 Nov 2012, 16:08

Has to be fender!!!! No wait, wrong kind of mod. My bad :lol:
Two stroke isn't enough, four strokes is way too many!! Image

User avatar
Captain Ahab
Posts: 10606
Joined: 13 Dec 2006, 00:13
Location: Bucks Co., PA
Contact:

Favorite mod

Post by Captain Ahab » 03 Nov 2012, 16:12

I like the Custom Center Console that rook made from a tool box

One of the coolest things ever!



https://tinboats.net/forum/viewtopic.php?f=3&t=16347





Image
Trying to Fish as often as Jim works :LOL2:

fishingmich
Posts: 156
Joined: 15 Mar 2011, 21:31
Location: SE Lower Mich

Favorite mod

Post by fishingmich » 04 Nov 2012, 10:43

I have to agree with Ahab. That toolbox/console is badass . Makes me feel very inadequate! I have console envy!
I fish, therefore I am AWESOME!
16' Smokercraft V Hull
15 hp Merc

Post Reply