fwman1

Is there a reason you want the battery that far forward? Not sure what boat, but my 2 cents from playing in small boats is that with you...

Doyou have a tachometer to tell you the rpm? It could simply be that you don’t have the right prop pitch for the load……..knowing what...

I used medium epoxy when I made up some frp and polystyrene foam board composite. I am thinking that for this application you may want...

This may be a long entry because I want to include my whole process in this post. Ill have pictures of the final product at the bottom...

A bit more progress.

Yes, it is there under the Hydro-turf.

Well, a lot of time has passed, but I am nearing completion of the Jon boat overhaul. New removable lights, new trolling motor and...

As mentioned it depends on what you're looking for. There's four "main" types of sonar, standard 2D sonar, down imaging, side imaging...

What all the above said! Get your hands on each unit in your budget, see which user interface works for you. Are you wanting mapping...

LOL, I wish I'd known about this ACRE board. It weighs about the same as my laminate and costs under $150 for a 1/2" 4'x8' sheet. It...

I did the support for the deck today. Another view. And a cross section.

.6 lb. per square foot isn't bad for weight. What is the cost per square foot roughly?

Price a 4x4 finished piece. One 4x8 FRP $41.00 One 4x4 pink foam $10.00. Epoxy 72 ounces $55.00. $106.00 for 16 square feet = $6.62/ft...

I forgot to add, the panel weighs 20.1.lbs It is about 12 square feet. I mixed 36 ounces of epoxy for each side lamination. A total of...

Finally got to work on this today. I used a 4" metal cutoff disc in a grinder to trim the edges of the glued sheets. I then used 80...