Search results

I have a 1965 Starcraft Seafarer 14' and it has one brace....

You might want to try e-bay for a service manual---> https://www.ebay.com/itm/1974-OMC-Johnson-6-HP-6R74-6RL74-Outboard-Service-Shop-Manual-LOTS-More-Listed-/201134076771?pt=Motors_Manuals_Literature&hash=item2ed4867363&vxp=mtr Have fun.

Try asking here====> https://forums.iboats.com/forum/owners-groups-by-manufacturer/s/starcraft-boats good luck.

Walmart has cup holders made out of plastic which hang on the side (about 2 bucks for 4 holders) which you can mover all over the boat and put away when you are done. I also use bicycle bottle holders bolted on loosely (swivels one way). They are light, strong, won't rust (aluminum) although...

It is a Starcraft...go here to learn and get info about it.. https://forums.iboats.com/forum/owners-groups-by-manufacturer/s/starcraft-boats

I use bicycle bottle holders (light and do not rust) and bolt them in loose so gravity keeps the drink from spilling when the boat rocks. Or if you really want cheap and you do not want to put more holes in your boat Walmart sells cup holders the you can hang anywhere on the gunnels (4 for about...

If you don't have one, try to get a "1978 Evinrude 9.9HP Service Manual" for YOUR paticular motor. Money well spent to learn about the motor parts. Good luck and have fun.

X2 just seams and rivets......Available in 2 lb and 8 lb kits. Expect a 2 lb unit of Gluvit to cover 25-35 square feet, when applied at 6-8 mils. An 8 lb unit covers 100-130 square feet at the same thickness. You only need the smaller kit.

Definitely agree with lckstckn2smknbrls -----> https://www.marinetex.com/gluvit.html 2lbs. covered every seam and rivet in my 14' tinny. Good luck and have fun.

Measure the exact length and width of your boat and then check your measurements at the following site with the "14A, 14B, 14R, and 14S models". ---> https://boatspecs.iboats.com/Sea_Nymph__Outboard__1978/bp/32br1397bt3y Might help, have fun.

I would agree with rscottp about not putting oil over latex, just stick with the self etch primer. If you are really not sure just give Rustoleum customer service a call and they should help. Home depot carries the Rustoleum latex primer that you bought, I would try returning it to them, might...

Came out in 2012.... https://www.seamarknunn.com/acatalog/Suzuki-DF20AL-Manual-Start--Tiller-Controlled--Long-Shaft-Outboard-SZDF20AL.html

Suzuki does make a 20 hp, manual start, long shaft.... Model DF20AL. I did not know where the OP was located and the graph is international.

The 20hp Suzuki manual start "IS" less weight then the 20hp Suzuki electric start...so what is not accurate?

https://www.thehulltruth.com/boating-forum/458401-4-stroke-vs-2-stroke-weight-bar-charts.html

How is the compression?

some info for you... https://www.fiberglassics.com/library/Duratech https://forums.iboats.com/duratech-240/

It is a 1994-----> https://boatinfo.no/lib/johnson/brochures/1994johnson.html#/24 Don't know about the idle issue.

How is the compression?

As your question here----> https://forums.iboats.com/starcraft-boats/starcraft-parts-463895-10.html or maybe here---> https://forums.iboats.com/starcraft-boats-53/