14' Boat Conversion Advise

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

doxthefox

New member
Joined
Apr 26, 2014
Messages
2
Reaction score
0
Location
Ontario, Canada
Hello Folks,

I've been a long time lurker of the forums and finally decided to post. I have been given a 14 foot Crestliner which is in need of some love, but otherwise is in fairly good shape.

I have done some research on the forums, and was wondering if this type of boat is suitable for a conversion? I love to fish, and a platform + bowmount motor would make my summer, as well as for a great project.

My worry is that the hull is too shallow and may not have decent stability once decked - any advice on my next steps? At the very least I expect I'll replacing the wood, seats, having a look at the transom and doing a full hull and interior paint job.

Manufacturer is Nordaican Boats, model Ensign 14.
 

Attachments

  • 14Crestliner-Side.jpg
    14Crestliner-Side.jpg
    121.6 KB · Views: 849
  • CrestLiner14-Top.jpg
    CrestLiner14-Top.jpg
    107.7 KB · Views: 849
  • Crestliner14-top2.jpg
    Crestliner14-top2.jpg
    128.8 KB · Views: 849
I have a 14 foot Starcraft that looks to be a similar build. I have a deck that is 2 inches below the gunnels and is 6 foot long. I used 1/2 inch exterior ply for mine. It's like I am standing on a rock in a busy river.
 

Latest posts

Top