16' Princecraft project boat

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Thanks for that info.

I planned out the placement before attaching, so that the light spread would fit the parameters. It does, so I should be in good shape.

Here is a picture of the switch panel I mounted to the bottom of my console. Basically, it's just a piece of 2x2 angle aluminum. Does the trick, and keeps the console neat. With a 1/2" drill bit, I can add as many switches as will fit. I hate drilling holes in boats.

20161213_145224.jpg
 
Top