Well some of you may have seen my 1436 i had that was beat up and twisted i was goin to try to use.... bad idea.... So i foun this 1652 with trailer for $1000. I plan on adding a center console, flush bowfishing deck with 4 400 watt hps floodlights, and later make the light rail enclosed. Gonna use plywood for the deck and keep the bottom floor open foir now until i can find some aluminum thats at a decent price. I am going to use a hand trolling motor until i get everything ready for my fan. Im not sure if i want to cut out the bench seat in the back, I want to to gain more room but dont know if it will just be more hassle than its worth
Also if any of you have some type of remedy to remove his old paint please enlighten me. I have tried 2 different acids, 2 different paint strippers, and carb cleaner. The only thing thats halfway working is sandpaper wich takes alot of time. I plan on removing all the paint and keeping it bare aluminum
Also the boat has 22 inch sides and is 75 inches across the gunels
Also if any of you have some type of remedy to remove his old paint please enlighten me. I have tried 2 different acids, 2 different paint strippers, and carb cleaner. The only thing thats halfway working is sandpaper wich takes alot of time. I plan on removing all the paint and keeping it bare aluminum
Also the boat has 22 inch sides and is 75 inches across the gunels