1652 Weldbilt customers boat for [email protected]

[mbweimar]

That looks really good so far. That fabrication is worth as much as the hull.

 

[Prowelder]

Well I'm back. Got sidetracked on my own build for a while, but I have to bump this thing out quick. Tonight I finished welding the front deck and installed the recessed trolling motor tray. An the wires and all. I'm going to finish this build and my tracker by the end of this month. We'll see what happens!

Sent from my SM-G920T using Tapatalk

 

[DDudley]

Sent from my SM-G920T using Tapatalk

Looks pretty sweet! Nicely done. I wonder if it would be a good idea to spray or roll a truck-bed liner with some grit for traction in case the floor get wet or covered with slime coat?

 

[gatorglenn]

Did you fabricate those hatches. Are buy them. What is the dimensions of the small ones. Thanks


Sent from my iPhone using Tapatalk

 

[Prowelder]

The hatches came from R&R hatches the small one is about 9 by 13 inches. I'm not sure exactly how the boat is going to be finished I think carpet. I am just doing the Metal Fab work for a friend

Sent from my SM-G920T using Tapatalk

 

[gatorglenn]

Thanks super job


Sent from my iPhone using Tapatalk

 

[Prowelder]

Recommendations for carpet for this boat is there a big difference in 20 and 24 ounce

Sent from my SM-G920T using Tapatalk

 

[Prowelder]

Recommendations for carpet for this boat is there a big difference in 20 and 24 ounce

Sent from my SM-G920T using Tapatalk

Disregard this post this is supposed to be on my tracker post

Sent from my SM-G920T using Tapatalk

 

[Prowelder]

Got some good time in on the boat this morning starting to wrap up this project.

Sent from my SM-G920T using Tapatalk

 

[Prowelder]

Almost done. Installed the Jacker plate on the back and the foam under the floor.

Sent from my SM-G920T using Tapatalk

 

[mbweimar]

Isn't it nice just having a harness to run for that jackplate, instead of mounting a pump and running hose?

 

[Prowelder]

Custom diamond plate. Why not right? Give it a little Flair

Sent from my SM-G920T using Tapatalk

 

[Prowelder]

Isn't it nice just having a harness to run for that jackplate, instead of mounting a pump and running hose?

Yes the jacking plate is really nice

Sent from my SM-G920T using Tapatalk

 

[Prowelder]

Installed some side wall covers. I think it really finishes it off. I think it completely changes the look of the boat. For some reason exposed ribs make the boat look cheap in my opinion.

Sent from my SM-G920T using Tapatalk

 

[Prowelder]

Completed this build. I guarantee you will not find another one like it.

Sent from my SM-G920T using Tapatalk

 

[Lockndam25]

nice Fab work, great build

 

[mbweimar]

Great job! Would it be possible to keep us updated on this boat after your completion? I'd like it see how's it's painted and rigged.

 

[Prowelder]

Great job! Would it be possible to keep us updated on this boat after your completion? I'd like it see how's it's painted and rigged.

Yeah I plan on it.

Sent from my SM-G920T using Tapatalk

 

[schinkr1]

Matt, thanks again for the awesome work you did for me. The rear hatch you built for me was perfect! It's on page 2 of my build if you want to check it out. https://www.forum.tinboats.net/viewtopic.php?f=21&t=41595

 

[Prowelder]

Matt, thanks again for the awesome work you did for me. The rear hatch you built for me was perfect! It's on page 2 of my build if you want to check it out. https://www.forum.tinboats.net/viewtopic.php?f=21&t=41595

Thanks man glad to help

Sent from my SM-G920T using Tapatalk