acwd
Well-known member
I got this motor it was originally a tiller handle and someone converted it to a remote. They cut the ears off that the tiller handle clamps to. I got all the parts to convert it back to tiller. Got it all together.. but the problem is when its wide open the roller cam/plate has about another 1/4" inch to go. The carb is wide open but the timing can advance a little more. Is this a problem? I have cant find how to time the handle and with the motor. Cant get the pointer on the handle to line up right either. I have messed with it and seem to come back to this same problem every time. Just cant figure out what I am missing.
Thanks
Steve
Thanks
Steve