I am getting spark on cylinder 1 and 3 and intermediate spark on cylinder 2 no spark on 4
I tested dva and ohms on the trigger and it’s getting good on both
I tested dva and open stator dva was above 230 and the ohms were 332
Coils are ohming out at 162 on each coil.
I’m lost on what to do next the stator does look like it got hot but it is putting out the right dva voltage?
I tested dva and ohms on the trigger and it’s getting good on both
I tested dva and open stator dva was above 230 and the ohms were 332
Coils are ohming out at 162 on each coil.
I’m lost on what to do next the stator does look like it got hot but it is putting out the right dva voltage?
