user 21074
Well-known member
- Joined
- May 12, 2016
- Messages
- 110
- Reaction score
- 0
Hoping PAPPY would chime in.I got a basket case motor last year and while going over it I noticed someone had notched out the starter bracket where the timing advance stopper screw is.Never saw this before.This was done to get more adjustment for some reason.I tried to time it with the Joe Reeves timing* method and found this notch is necessary to get it timed.I tried backing screw off and put washers in the notched area to test it and couldn’t time it.Flywheel key is good and have good spark if your wondering.Could a bad power pack throw timing off if no mechanical reason was found??