brianlt21
Well-known member
I need an anchor for PA Mostly fishing in the river but my bot is 14' deep v just need something to hold and don't what to take 5 different anchor of even by them to try which one works the best
we use to use them all the time but drilled 4 3/4 in holes in the can at the bottom and then ran 2 3/4 x12"pices of rebar though the cans then filled them with cementdedawg1149 said:ihave used the gallon coffee cans with cement for years works good on a light johnboat
dedawg1149 said:ihave used the gallon coffee cans with cement for years works good on a light johnboat
you might want to chack the plug it might have diarrhea you know the sguirts :LMFAO: :LMFAO:ben2go said:dedawg1149 said:ihave used the gallon coffee cans with cement for years works good on a light johnboat
Mine weighs about 40 to 50 pounds in it's current configuration.I recently measured my jon thinking it looked smaller than a 1030.It measured 27" across the bottom on the outside and 32 across the top rails.It measured 9'11" long.I think my boat shrank from all the warm weather. :LMFAO:
And I'd say odds are "fair" that might happen at some point in time. On the up-side, making it out of rebar would be cheap of you can weld your own.......might see another future project :wink:Waterwings said:I'd have a nice sharp knife handy to cut the line if that thing ever gets stuck and you can't retreive it :wink:
Enter your email address to join: