Anyone Looking For A Jet Jon?

[fishbum]

A friend of mine bought this Custom built boat a couple months ago and has no idea why, he doesn't fish, anyway the boat is a little over 16' 48" bottom, all .125 welded construction, built in storrage, Kawasaki 100hp ski motor.
has trim, and reverse. good paint, inside is done with anti skid. I have not had it ouy yet but told it runs strong.
This is the best done jon don I have seen around here (Georgia) Will post in for sale also. Barry 770-231-7430

 

[tonka329]

Still available?

 

[RiverBottomOutdoors]

That thing is sweet lookin'! I wish I had the money.

 

[tonka329]

Wonder if it's still available :mrgreen:

 

[fishbum]

Sorry didn't see this post! No sold it right away
And I herd it sold again! The hull was all .125
And everything done well. Wasn't as fast as I think it should have been!

 

[tonka329]

How did you hook up the steering? I want a console in mine

 

[PSG-1]

tonka329 » Today, 17:02[/url]"]How did you hook up the steering? I want a console in mine

You can use a tele flex jet boat steering helm, in either 135 or 270 degree turn setting. For the cable, use a CC6400 series push-pull cable, it has 5/16 X24 threads on both ends.

 

[lovedr79]

Man that thing is definitely sweet. One day I will have one.

 

[tonka329]

PSG-1 » 06 Aug 2014, 18:20[/url]"]

tonka329 » Today, 17:02[/url]"]How did you hook up the steering? I want a console in mine

You can use a tele flex jet boat steering helm, in either 135 or 270 degree turn setting. For the cable, use a CC6400 series push-pull cable, it has 5/16 X24 threads on both ends.

Where can this be found? Cable for throttle or steering?

 

[fishbum]

Like the steering and throttle on a fiberglass jet boat
Like sugar sands. I have a couple of them

 

[PSG-1]

tonka329 » Yesterday, 21:32[/url]"]

PSG-1 » 06 Aug 2014, 18:20[/url]"]

tonka329 » Today, 17:02[/url]"]How did you hook up the steering? I want a console in mine

You can use a tele flex jet boat steering helm, in either 135 or 270 degree turn setting. For the cable, use a CC6400 series push-pull cable, it has 5/16 X24 threads on both ends.

Where can this be found? Cable for throttle or steering?

Any marine supply outfitter like West Marine, Boater's World, etc should be able to 'steer you in the right direction' :mrgreen:
For the cable, the last 2 digits are the length in feet. For instance, if you want a 16 ft cable, the code would be "CC64016"
Remember to allow for the radius of any bends when taking your measurements.

 

[tonka329]

:beer: Thanks guys