Sask tracker 1542
Well-known member
- Joined
- Mar 3, 2012
- Messages
- 66
- Reaction score
- 0
Ok well I found out where the needle bearings were from. the drive shaft bearing in the upper part of the lower unit...
But there is a brass seal and a rubber bushing on top of that bearing. In my manual it says i need a bearing puller special tool #380655
and a bushing remover tool. #304514
How do i pull this seal without a puller? I have tried prying it up with a screwdriver but the soft brass is bending.
any ideas?
link to diagram its part number# 39 & 50 i'm talking about.
https://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1973&hp=18&model=18304A&manufacturer=Evinrude§ion=Gearcase
top view
https://www.sschapterpsa.com/ramblings/OB%20images/Driveshaftsealinstalled.jpg
But there is a brass seal and a rubber bushing on top of that bearing. In my manual it says i need a bearing puller special tool #380655
and a bushing remover tool. #304514
How do i pull this seal without a puller? I have tried prying it up with a screwdriver but the soft brass is bending.
any ideas?
link to diagram its part number# 39 & 50 i'm talking about.
https://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1973&hp=18&model=18304A&manufacturer=Evinrude§ion=Gearcase
top view
https://www.sschapterpsa.com/ramblings/OB%20images/Driveshaftsealinstalled.jpg