DuckChaser
Member
- Joined
- Feb 14, 2013
- Messages
- 22
- Reaction score
- 0
I got my first boat a couple of weeks ago. It is a 1652 Alweld. It has a Evinrude 48 SPL on it. I was looking for a project boat and that is exactly what I got. The boat was in decent shape when I got it. There were only consmetic issues. I have been working on getting everything stripped down. I am at the point now that I have a few questions for some seasoned tin moders. I got everything taken out and most of it cleaned up. I am in the process of removing all of the old bed liner the PO had installed. It is a pain to get off. I have put a coat of primer on boat and painted the bottom (the wife had to have the garage back so I only painted the bottom). I will paint the sides when I paint the inside. I have plans to put hydro turf in (I already have the hyrdo turf), add a gun/tackle box, and redo all of the wiring. The wiring was horrible. That was the first thing that I cut out. I am also planning on extending the back deck. I lucked out and the PO had already installed an aluminum floor. So I didn't have to buy aluminum for that. I got plywood, lumber, and all the wiring from work. I guess it pays to be in construction industry sometimes. I do appologize for the long opening post and the poor picture quality. They are from my phone. Please feel free to add any comments or suggestions and thanks for looking.
Attachments
-
2013-02-17_21-18-30_539.jpg21.2 KB · Views: 3,042
-
2013-02-17_21-18-36_938.jpg21.4 KB · Views: 3,042
-
2013-02-21_17-16-29_811.jpg26.2 KB · Views: 3,042
-
2013-02-21_17-17-07_192.jpg996.4 KB · Views: 3,042
-
2013-02-23_18-15-19_642.jpg25.5 KB · Views: 3,042
-
2013-02-24_14-50-28_235.jpg807.2 KB · Views: 3,042
-
2013-02-23_18-16-07_343.jpg23.5 KB · Views: 3,042
-
2013-02-24_18-01-16_593.jpg1.3 MB · Views: 3,042
-
2013-03-02_17-10-33_967.jpg23.5 KB · Views: 3,042
-
2013-03-02_17-10-44_955.jpg24.3 KB · Views: 3,042
-
2013-02-23_18-15-45_556.jpg1.3 MB · Views: 3,042
-
2013-02-24_18-01-22_153.jpg16.1 KB · Views: 3,042
-
2013-03-02_17-10-51_764.jpg21.9 KB · Views: 3,042