retiredff
Well-known member
I just bought a '92 9.9 merc. From the measurements I have it is a short shaft motor 17". My transom height is 15". So it will sit about 2" lower than it should if you measure from the bottom of the boat to the anti cav plate. Is the 2" to low acceptable or should I shim the motor up some?
The motor is going on a polar kraft 1448 jon. I usually run w/2 adults and gear,but at times just me. Both adults are 180# or so each and the boat dry is 290#, 2 batteries, usual anchors etc.
Tony
The motor is going on a polar kraft 1448 jon. I usually run w/2 adults and gear,but at times just me. Both adults are 180# or so each and the boat dry is 290#, 2 batteries, usual anchors etc.
Tony