RiverBottomOutdoors said:I have Seadek on my boat (1656 CCJ link in signature) and I love it. I have the 6mm (2-ply) with a brushed finish (finish they use on their faux teak).
SquiggyFreud, make sure you are sitting down when you read the quote from Seadek.
RiverBottomOutdoors said:Mine was about 1100. You can see the quote with the drawing from SeaDek in my thread.
SquiggyFreud said:RiverBottomOutdoors said:Mine was about 1100. You can see the quote with the drawing from SeaDek in my thread.
Reading it now, looks great. looks like you may have more deck to cover that I do.
I did not put any measurements on my template...should I?
RiverBottomOutdoors said:SquiggyFreud said:RiverBottomOutdoors said:Mine was about 1100. You can see the quote with the drawing from SeaDek in my thread.
Reading it now, looks great. looks like you may have more deck to cover that I do.
I did not put any measurements on my template...should I?
No measurements needed. They will digitize your template exactly like you have it drawn. They will correct lines that aren't perfectly straight or circles and shapes that are obviously not geometrical correct. For parts that are mirror images of each other I made sure to note that on the template. That way I only had to draw the part once and they could just flip the template over to get the mirror.
I haven't finished with my Seadek. I have a few more pieces that I would like to add. Hope to have the spare coin to get that done in the Spring.
This is a very good video to watch. Walks through the template process, how they make it, tips on installing it.
https://www.youtube.com/watch?v=tvwSwOiLXRA
RiverBottomOutdoors said:I want to say a 3 weeks or so. They create the template and send it to you to proof so that added a little time. I tweaked somethings on mine.
SquiggyFreud said:RiverBottomOutdoors said:I want to say a 3 weeks or so. They create the template and send it to you to proof so that added a little time. I tweaked somethings on mine.
Just received my first quote...2450 dollars, holy poo!
My boat is a alumacraft 1650, very similar to yours in size . I asked for a quote on both 6MM and 13MM for the floor of my boat but only received the quote for 13mm.
I responded asking for 6mm throughout the boat and will see what they quote me on that.
RiverBottomOutdoors said:SquiggyFreud said:RiverBottomOutdoors said:I want to say a 3 weeks or so. They create the template and send it to you to proof so that added a little time. I tweaked somethings on mine.
Just received my first quote...2450 dollars, holy poo!
My boat is a alumacraft 1650, very similar to yours in size . I asked for a quote on both 6MM and 13MM for the floor of my boat but only received the quote for 13mm.
I responded asking for 6mm throughout the boat and will see what they quote me on that.
I think the 13mm is really just for a helm pad. Help the salties on those long steams in the seas; it's like an anti-fatigue mat. I wouldn't recommend doing the whole floor in that. 6mm is plenty for cushion.
Paint-on non-skids don't compare to the EVA foam products. If you just want grip the non-skids are great. If you want comfort and grip Seakdek, Hydroturf, or this Oceangrip products are the way to go. Also helps quite the boat down. Hell, I even sleep on my Seakdek. Try laying your face on that non-skid stuff.
Enter your email address to join: