Post a Pic of your boat!

[Deezil]

Newest addition, LV14, I also have an LV10

 

[ckhenshaw4]

Still have a little work to do on the trailer but there she is

That is sweet. Hope mine turns out that nice.

Sent from my Nexus 7 using Tapatalk

 

[Codeman]

Finally picked up a new to me rig. 1995 17.5x52 Weld-Craft Flat Bass with a 1995 90/65 Mariner jet. Rides like a Cadillac compared to my old setup.

Sent from my SAMSUNG-SM-N920A using Tapatalk

 

[gatorglenn]

Sweet


Sent from my iPhone using Tapatalk

 

[mudpuppy]

Hey guys & gals,

This is my first post and thought a picture of my boat would be appropriate. I chase stripers on the Susquehanna Flats....Tight lines.

2013 G3 V164C with F70 Yamaha.

 

[muskiemike12]

This is my new boat. Tracker Pro Guide V175 Combo. I did the break in on the motor on Saturday morning and played in it the rest of the weekend.


Sent from my iPhone using Tapatalk

 

[LDUBS]

This is my new boat. Tracker Pro Guide V175 Combo. I did the break in on the motor on Saturday morning and played in it the rest of the weekend.


Sent from my iPhone using Tapatalk

MuskieMike, that is a beautiful boat and it looks like the crew is lined up and ready to go. Congratulations.

I have a question for you if you don't mind. I see your boat sits down right between the fenders. How much clearance is there from the inside of the fenders to the hull? Also, do those side rollers touch the hull or is there a little space? Reason I'm asking is I may lower my boat on the trailer but it will be a tight fit.

 

[muskiemike12]

This is my new boat. Tracker Pro Guide V175 Combo. I did the break in on the motor on Saturday morning and played in it the rest of the weekend.


Sent from my iPhone using Tapatalk

MuskieMike, that is a beautiful boat and it looks like the crew is lined up and ready to go. Congratulations.

I have a question for you if you don't mind. I see your boat sits down right between the fenders. How much clearance is there from the inside of the fenders to the hull? Also, do those side rollers touch the hull or is there a little space? Reason I'm asking is I may lower my boat on the trailer but it will be a tight fit.

Thanks!! There is about 3 inches of clearance on the fenders and about 1 inch on the guides on the sides.


Sent from my iPhone using Tapatalk

 

[Aleslin90]

This is my alumacraft 1448 jon. Just finished up the decking and paint in the last few days. she will be back on the water for the first time in two weeks this evening. Still have a good amount of work ahead, wiring up all the electronics and such. very happy with how she turned out so far.

 

[Old Hunter]

My Dad on my boat after launching back in May. I was about to put the truck and trailer away and board myself. OH

 

[jabee]

2017 Xtreme 1542 SST River Skiff. 25 Suzuki. Nice little river boat.

 

[gatorglenn]

Sweet, I like this a lot. Just the kind Iam looking for now. Congrats
Any pics of inside layout, thanks


Sent from my iPad using Tapatalk

 

[ace57]

My 2010 tracker grizzly 1448 side console.
2006 merc 25hp 4 stroke efi.
Motor guide 45lb.

 

[gatorglenn]

My 2010 tracker grizzly 1448 side console.
2006 merc 25hp 4 stroke efi.
Motor guide 45lb.

[emoji106]


Sent from my iPad using Tapatalk

 

[Jebber]

Might as well quit lurking and post.

My 2013 Sea Ark 1872 Pro. Tunnel, sponsons, 135HO. I've added 3-bank charger & fuel/water separator. Saving up for trolling motor & fishfinder.

I fish central TX lakes and bays, flats, rivers down on the coast.

 

[Zum]

Nice boat, must fly with that 135hp on it.

Sent from my SM-T350 using Tapatalk

 

[Jebber]

Nice boat, must fly with that 135hp on it.

Sent from my SM-T350 using Tapatalk

Dunno if I’ll ever crank it out. 2 people on a windy day I got 49.2 mph on a phone app.

Plenty fast enough!

 

[MinnesotaJoe]

my 1957 Alumacraft Deep C with 1957 Evinrude Fastwin 18

 

[Katzklawz]

This is my soon to be catfish hunter/whatever I can get to bite the hook boat. I picked it up yesterday for 115.00 from another vet off of OfferUp. It's a 12' fiberglass semi vee with no manufacture information/plate that I can find and the previous owners registration has 'unknown' for what year/make it is. Would anyone happen to know much about these older boats? The plan is to have something comfortable for myself and my wife to fish from with a trolling motor on the local lakes and rivers. Any suggestions for fitting out would be appreciated. :?:

 

[captain belly]