I am starting a modification project on my 14' v-hull. I have done some research and have bought materials. I got pressure treated 1/2" plywood for the floor. What I bought to seal the wood was Bondo fiberglass resin (recomended by the builder of the ODF{Olive Drab Floater} a well known mod project and a very helpful resource). I do not know if this the best way to go? I did not get the fiber glass fabric to lay in the resin as I am not patching the wood. I just want to get a good seal/ preservative on the wood as it is a floor. I intend to cover the wood w/ carpet, and also want to make sure the glue will not breakdown any sealer I use. :wink: Please help!