Victor Coar
Well-known member
- Joined
- May 24, 2008
- Messages
- 115
- Reaction score
- 0
I have watched the videos about trailer bearings. I have searched the net for other videos. here is my problem.
1 removed the cap.
2 removed the cotter pin
3 removed the nut
4 removed the washer
5 It would appear that there is another washer or nut of some kind before the bearing. I can't get it off - It seems like if it were a washer i could tap it and it would come off so I think it's a nut...there is no rust inside the hub but, the hub has come loose and was warm to the touch this weekend while using the trailer.I can't manage to get a hold of it with pliers so I loaded it up with wd40 in hopes I could loosen it today. I don't mind buying some new parts I probably should anyway but, I am worried about the axle do any of you guys have any Idea what I am dealing with?
Please advise and thank you.
1 removed the cap.
2 removed the cotter pin
3 removed the nut
4 removed the washer
5 It would appear that there is another washer or nut of some kind before the bearing. I can't get it off - It seems like if it were a washer i could tap it and it would come off so I think it's a nut...there is no rust inside the hub but, the hub has come loose and was warm to the touch this weekend while using the trailer.I can't manage to get a hold of it with pliers so I loaded it up with wd40 in hopes I could loosen it today. I don't mind buying some new parts I probably should anyway but, I am worried about the axle do any of you guys have any Idea what I am dealing with?
Please advise and thank you.