ok guys I got a trailer for my flatbottom, but its set up a bit weird. It has rollers in the middle, but the two metal braces sticking up for the bunks on the outside bottom are set up to take a 2x4 bunk, but in the upright position and not the flat position. In other words when i set the bunks in the cradle they will be sitting up with the 2 inches part touching the boat. is this a problem? remember it has rollers in the middle for stability as well, but the outside bracing will be set up like this with the bunks upright. and my boat is a 15' flat bottom. any ideas, comments are welcome.
thanks
thanks