Big Buck
Well-known member
- Joined
- Oct 30, 2008
- Messages
- 72
- Reaction score
- 0
I am installing a big foot switch on my boat. I have installed my own plug on my front deck. My question is, do I plug the positive and negative from the motor to the plug and then the ground from the plug to the switch and then the other wire from the switch to the battery? Or, do I run the negative from the motor to the switch the one of the wires from the switch to the plug and then the wire from the back of the plug to the battery? I have attached a picture that i drew of the first one that i have talked about. This is the way that I would prefer. Do you think it will work.
Thanks in advance.
By plug I am talking about this.
https://www.basspro.com/webapp/wcs/...1_23099_225001006_225000000_225001000_225-1-6
and the big foot switch is this
https://www.basspro.com/webapp/wcs/...1_16071_225001006_225000000_225001000_225-1-6
Thanks in advance.
By plug I am talking about this.
https://www.basspro.com/webapp/wcs/...1_23099_225001006_225000000_225001000_225-1-6
and the big foot switch is this
https://www.basspro.com/webapp/wcs/...1_16071_225001006_225000000_225001000_225-1-6