Sinkingfast
Well-known member
- Joined
- Oct 5, 2014
- Messages
- 262
- Reaction score
- 17
Omc 15hp small bore, fresh rebuild cause metal reeds had reed tips broken. So I use fiber reeds, jetting slightly rich and never any case explosions, or sneezing of one prefers.
I did some case cleanup, and behind the liner mods and so forth. With tach it spins 7400rpm with 10p4blade prop. I don't run it that fast but upon occasion when I'm with a buddy.... 8)
But by the end of the year it was spitting back and hard to start. I knew the cause so i just pulled it down today and found burnt reed tips on all 4 reeds. What is my next move to fix this issue?
I did some case cleanup, and behind the liner mods and so forth. With tach it spins 7400rpm with 10p4blade prop. I don't run it that fast but upon occasion when I'm with a buddy.... 8)
But by the end of the year it was spitting back and hard to start. I knew the cause so i just pulled it down today and found burnt reed tips on all 4 reeds. What is my next move to fix this issue?