Compartment Inserts

[fender66]

Okay guys....looking for suggestions.

On the Nitro and Tracker boats (lower end Nitro)...if you open a compartment lid, there are removable inserts in them. They are available from a dealership, but they want WAY TO MUCH MONEY for them.

Where can I find durable, plastic inserts at various sizes for a deck that I am designing?

I have NOT been able to find a reference on line for the Tracker/Nitro inserts that I'm referring to...but they are big enough to hold 3700 boxes or small enough to hold ???

Thanks in advance!

 

[BigTerp]

Not sure the size of your compartments, but Tempress makes various size hatch liners.

https://tempress.com/#!/~/category/id=442147&offset=0&sort=normal

You can usually find them cheaper off of Ebay, Amazon, etc.

 

[fender66]

BigTerp » 28 minutes ago[/url]"]Not sure the size of your compartments, but Tempress makes various size hatch liners.

https://tempress.com/#!/~/category/id=442147&offset=0&sort=normal

You can usually find them cheaper off of Ebay, Amazon, etc.

That's exactly what I'm looking for! Compartments are not made yet. I needed to find inserts to determine sizes.

THANKS!

 

[thewalleyehunter]

try www.greatlakesskipper.com too

 

[BigTerp]

fender66 » Today, 11:12 am[/url]"]

BigTerp » 28 minutes ago[/url]"]Not sure the size of your compartments, but Tempress makes various size hatch liners.

https://tempress.com/#!/~/category/id=442147&offset=0&sort=normal

You can usually find them cheaper off of Ebay, Amazon, etc.

That's exactly what I'm looking for! Compartments are not made yet. I needed to find inserts to determine sizes.

THANKS!

No problem.

I was going to cut my own hatches for my aluminum deck and rear bench seat, but decided to take the lazy way out and go with the tempress hatches and liners. They make a nice tackle hatch as well.

https://tempress.com/#!/~/product/category=610304&id=1527355

I'm planning on one of these in my rear bench seat along with a standard hatch w/liner.

 

[fender66]

Yeah....after I looked at these closely, I'm not sure they are big enough. I will have to wait til I get home and check my layout. I hope it will be as simple as these.

 

[chevyrulz]

you can also get rubbermaid style plastic bins @ lowes or home depot, find a good length/width, and you can always cut down the height

that's if u wanna go super cheap :mrgreen:


kinda like this tinboater:

to make the liner shorter, cut off the top of the bin leaving a couple inches of the top, remove however many inches of height from the bottom section, and then pop rivet the top back on, bingo custom height. i didn't invent that idea, but i did see a thread on this website or another where some1 did it & it looked great