Post a Pic of your boat!

[fender66]

Great boat Dan....welcome aboard!

 

[batman]

Thanks much!
Anyone in the tidewater area looking to fish area lakes and rivers,give me a shout,perhaps we could do some fishin.
Later
DanD

 

[Hanr3]

I dont think I ever posted a pic to this thread.

Here you go, one fully loaded boat. Link to the build in my Signature, and build I did. Everything from pulling the bench seats, building a custom center cabinet for my livewell/electrical control center/battery storage/seat, flat floor, plumbing and wiring throught out, storage lockers, led lighting, rod stroage, and I managed to get all the original floatation back in her.

And in the pic the boat is loaded with camping/fishing gear for the weekend.

 

[kairo]

Here's my 16' Lowe "Big Jon" behind my Jeep Liberty.

 

[rockbass]

14'

 

[ohiobass]

Just got it last month.
2001 Smoker Craft 16 ft Big Fish / 9.9hp Johnson

 

[keddano]

Here's my old Girl. Use to use it for alot of Swamp Duck Hunting in Michigan,then after the Lab died,sorta fell out of hunting and she sat since '97. Since then we moved to Iowa land of Corn and damned Creeks,so just redid the wood in the transom and currently has a 1960 5.5 Johnson for her.(will be upgrading to a 15 HP soon) She is in need of a new Camo Job and will be adding some upgrades to use for River Running and fishing. The plastic name plates were broken and gone since I got it given to me years ago. So it is registered as a unknown. Does anyone recognize what brand it is by the corner of the remaining plate,they were on both sides in the rear? It was a white plate and looks like a teal color boarder and the name may have been too. Seems like Sears had them like that? Thanks Guys and Great Site

 

[jon3516]

Hi Guys,
I'm new to the site but not new to boat mods and this is the last one I did. It's a 1983 Duracraft 1436 with a 1976 9.9 Evinrude. Motor cover is off of a 15. It's nothing fancy but it fits my needs perfectly. I just did a low deck up front, closed in the rear over the gas tank, put a floor in the middle and camo'd it with a stencil I made. I am going to find a 1542 or a 1648 to build for a river boat after the first of the year. Thanks for looking and I love this site!

 

[ckr74]

Here's mine. A far cry from where I started. 1979 Lowe Big Jon with a 25hp Mariner. Had a few ignition problems but now she runs good. We've had it out 3 times. Can't wait until water temp drops a little.

 

[McAwful]

1995 Weldbilt 16, Honda BF40, Minn Kota Riptide 55 lb thrust

 

[McAwful]

Don't know what i did wrong, but...working on it.

 

[ecb223]

Here is my boat UNKNOWN MAKE custom paint by myself and my daughter

 

[ecb223]

Here is my new boat its a 1975 Alumacraft with a 1966 18hp Evinrude

 

[Henry Hefner]

Here is my boat UNKNOWN MAKE custom paint by myself and my daughter

Sweet paint job! Looks like a tiger is hiding in the tall grass...

 

[ecb223]

Hey thanks alot. It took my daughter only about an hour and a half to tape it all off and or me to spray it. We copied it from an A-10 warthog tank killer. I'm sorry about your son. I was in the Marine Corps also 1991-1996 HMM-364 I was a CH-46E Crew Chief
Semper Fi
Eric

 

[ecb223]

Here is another one

 

[imbrave1]

Grumman circa 1950's. I sent them 2 emails and no response yet. I better call them for a date of manufacture.

 

[tinfanatic]

My Feather Craft Topper 12 !!!!!!!!!!!!!!! I am NC and love these boats. I need a motor.....9.5-15hp...!

 

[Flatsdaddy]

Here's my 1972 Alumacraft 1648 fishing on Apalachicola Bay last weekend.

I'm planning to paint her and redo her decks soon.

 

[dixie_boysles]

almost done restoring!