WIRING A MERCURY 25 (2001 S STROKE)

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

gunz

Well-known member
Joined
Mar 21, 2016
Messages
107
Reaction score
0
Location
Yukon Ok.
I got my controls ordered, now for the electrical. I have an 8 prong plug on the motor. I know one is the kill switch that I need to shut if off, and I can figure out the starter wire fro electric start but not completely sure what all the other wires are for. Any help. gonna make my wiring harness for keyed start and shutoff tomorrow after work. just looking for anyone that has ran their own electrical. thanks
 
This is the info that I had archived for the 8 pin connector.

red= 12 volt positive
black= ground
purple= 12 volts key on power
grey= tach signal lead
black/yellow= ignition stop circuit
yellow/red= starter circuit
yellow/black= choke circuit
tan/blue= warning horn

i was able to find a web page this morning that supported the same data.

https://www.maxrules.com/fixmercwiringcodes.html

Rob
 

Latest posts

Top