It's been a slow couple weeks... lots of rain and humidity makes it near impossible to work outside without dropping dead. I did get the dash and foot boards made out of some nice cedar.
Since one of the side emblems had some damage, I decided to put the good one on the dashboard...
Got the new transom installed:
The seats were surprisingly easy to make. All you need is a 1.5" metal hole saw:
https://www.amazon.com/gp/product/B07DQBD7GH/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
And one of these dimple dies with an air hammer:
https://www.amazon.com/Sheet-Metal-Flared-Hole-Dimple/dp/B07B8V1KPH/ref=sr_1_1?dchild=1&keywords=dimple+die+1.5&qid=1598809012&s=automotive&sr=1-1
Trim the edges with this:
https://www.amazon.com/gp/product/B017FMGV7G/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Totally happy with how they came out. Very comfortable too.