So i was out just tooling around with my dad and daughter, ran through a shallow spot and that was it. Couldn't go fast anymore, only about 2 or 3 mph. when i rev the motor, it just acts like it doesnt have a prop. idle it home and noticed oil was coming out of just above the prop area.
i don't know much about motors, i could figure it out with some help from you guys so let me know what to do.
im guessing remove the cotter pin and but from prop, undo the 3 bolts on the lower unit and slide off internal shaft to see whats going on. i just want to be sure i do something right.
i don't know much about motors, i could figure it out with some help from you guys so let me know what to do.
im guessing remove the cotter pin and but from prop, undo the 3 bolts on the lower unit and slide off internal shaft to see whats going on. i just want to be sure i do something right.