G gettinback Member Joined Apr 18, 2015 Messages 24 Reaction score 0 Nov 28, 2016 #1 Just needing help on transducer placement on a 1436 flatbottom Jon.
gatorglenn Well-known member Joined Sep 9, 2015 Messages 412 Reaction score 0 Nov 28, 2016 #2 I would try to stay at least 8 inches away from the motor and in between two of your bottom straits. Do not put it right behind the bottom strait Sent from my iPhone using Tapatalk
I would try to stay at least 8 inches away from the motor and in between two of your bottom straits. Do not put it right behind the bottom strait Sent from my iPhone using Tapatalk
gatorglenn Well-known member Joined Sep 9, 2015 Messages 412 Reaction score 0 Nov 29, 2016 #4 Also make sure the ducer body is mounted half of it is below the bottom of the boat. And it's level or slightly angled down in the back. This will give you good readings even at WOT. Sent from my iPad using Tapatalk
Also make sure the ducer body is mounted half of it is below the bottom of the boat. And it's level or slightly angled down in the back. This will give you good readings even at WOT. Sent from my iPad using Tapatalk