motor/boat compatibility

[dschnarr25]

Whats up?...i have a 1987 traveler 16 ft bass/jon boat, its got a 20 in transom. Would a 1986 merc 90 six cylinder be alright for this boat? Ive seen similar boats with similar motors,,,just want some opinions..thanks guys..

 

[muskiemike12]

If it is rated to handle a 90, then go for it. Those inline 6's were great motors!

 

[dschnarr25]

muskiemike12 » Today, 09:15[/url]"]If it is rated to handle a 90, then go for it. Those inline 6's were great motors!

Thats the thing, it doesnt have a plate, and cant find any info on it...transoms thick, and in good shape, think im gonna do it...i had an inline six mariner, bout the same thing...lotsa p
Power....

 

[Ranchero50]

Refer the coast guards guide for home built boat building. They discuss how to tell if you have too much engine for your hull. A lot of it has to do with backsplash and stability in turns. Most data plates are for tiller steering, console steering changes the rating a good bit because it moves the CG forward.

 

[sr71]

This info may get you in the ballpark....although for 1989 models--> https://boatspecs.iboats.com/Traveler_-Arkansas-__Bass_Boat__1989/bp/31br2061c11y