depth finder question

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dearl

Well-known member
Joined
Jun 21, 2009
Messages
338
Reaction score
0
Location
Rockingham, North Carolina
Will the ping of one transducer interfere with another. I want to mount another depth finder on the boat, and will probably mount the transducer right beside my other, is there any problems with that? I have an eagle on there that I trust very well, but it is not gps ready, and the other unit is.
 
Your going to try to use them at the same time?
If there the same frequency,theres diffenitly going to be interference.
Why two tranducers in the same spot?
I've heard of one in the stern and one on the trolling motor but not 2 in the same place.
 
Zum said:
Your going to try to use them at the same time?
If there the same frequency,theres diffenitly going to be interference.
Why two tranducers in the same spot?
I've heard of one in the stern and one on the trolling motor but not 2 in the same place.


I agree.
 
I've heard of it, but haven't seen it in action. I'm going to do that on my boat, but haven't yet. I'm thinking one that shows the bottom and gps/maps, and one pointing forward to look for stumps/brushpiles. I'd be curious to know if anyone has run two simultaneously as well.
 
Top