kthmarks
Member
I thought I'd share with you (for the guys who have one), what's beneath the side panel after you drill out +/- 60 pop rivets. I installed a Minn Kota 110 charger for my starter battery under the console and ran the wires to the stern this way. I have some sheet metal experience so the drilling of the heads of the rivets was no big deal and the rivet shafts were easily tapped out with an 1/8 (sometimes 3/16") drift.
Hope this is helpful to someone in the future should they need the info.
Hope this is helpful to someone in the future should they need the info.
