Quick Repair

[Dennis1022]

Hey everyone I just want to pass this on to anyone who comes up with this problem! I was putting mytrolling motor on and found out that the 1 thread bolt was stripped. I tighten the other one up, but it still didn't want to hold. So I got a C-Clamp and clamped it on the bracket. Then I drilled through the c-clamp into the main bracket. I then used 3" bolt and locking nut and check to make sure it will hold. I then got my black spray paint and the bracket isn't pretty but it works.
https://i579.photobucket.com/albums/ss234/Dennis102298/100_0267.jpg
https://i579.photobucket.com/albums/ss234/Dennis102298/100_0268.jpg
https://i579.photobucket.com/albums/ss234/Dennis102298/Brokenclampfor33LBMinnKota.jpg
https://i579.photobucket.com/albums/ss234/Dennis102298/C-Clampon33LBMinnKota.jpg
Most likly someone already knows this but I thought maybe someone didn't know!

 

[Loggerhead Mike]

good idear

 

[BLK fisher]

Very clever. I like it. =D>